•
To cancel restoration of factory-default settings, release the
setup
and
display intensity buttons
. The
CLEAR
and
CANCELLED
messages will blink on the front panel
display as shown below to indicate that restoration of
factory default settings has been cancelled.
5-4
Troubleshooting & Maintenance
Mark Levinson
(continued)
Restoring Factory-Default
Settings
Performing this procedure restores all parameters and user-defined
controls to their factory-default settings. Before performing this
procedure, it is recommended to record all custom settings on the
Installation Worksheet
(page A-4).
To restore factory-default settings:
1. Press and release the front panel
power button
to power off
the Nº 320S. It is also recommended to power off all associated
components.
2. Press and hold the front panel
setup
and
display intensity
buttons
.
3. Still holding the
setup
and
display intensity buttons
, press
and release the
power button
to power on the Nº 320S.
•
The
CLEAR SETUP?
message will appear on the front
panel display as shown to the left.
4. Choose one of the following:
•
To restore factory-default settings, continue holding the
setup
and
display intensity buttons
for about 10 seconds.
The
FACTORY SETTINGS RESTORED
message will blink
on the front panel display as shown below when factory-
default settings have been restored.
CLEAR SETUP?
FACTORY
SETTINGS
RESTORED
CLEAR
CANCELLED
5. Power on all associated components that were powered off in
step 1.
