19
•
POWER-UP
: When AC power is first applied to the Nº37, this mes-
sage is displayed while the Nº37 checks its circuitry and software
to ensure proper operation.
•
RANDOM
: Shown momentarily when the Nº37 has been placed
into its
random play
mode (see p. 25).
•
READING
: The Nº37 is reading the table of contents on the CD;
appears when a disc is first inserted.
•
REVISED
: Changes in an existing playlist have been recorded in the
Nº37’s permanent memory; appears when the
p
button is
pressed and held for a few seconds, after having edited the playlist.
•
RPT DISC
: The Nº37 has entered the Repeat Disc mode, which will
repeat the entire disc (or its playlist) endlessly, until it is asked to
stop; this mode is activated by pressing the repeat button one or
more times.
•
RPT TRK
: The Nº37 has entered the Repeat Track mode, which will
repeat the current track endlessly, until it is asked to stop; this
mode is activated by pressing the repeat button one or more times.
•
SAVED
: New information was recorded in the Nº37’s memory; ap-
pears after the
p
button is pressed and held to save a
new playlist (for example), or to save new Link settings in perma-
nent memory, or after changing the status of either Index 0 play-
back or Standby (manual or auto).
•
SCANNING
: The Nº37 is leaving the Extended Pause mode, and is
scanning for the point at which it will return to normal Play.
•
STANDBY
: The Nº37 is going into standby, which will disable its
front panel controls, mute its output, and turn off its display and its
internal transport mechanism (including the laser). Critical circuitry
remains on to remain at optimal operating temperatures, enhanc-
ing performance, reliability and longevity.
•
STOPPING
: The disc is being braked to a stop prior to the drawer
opening.
•
TEACH IR
: Shown when entering the Nº37’s
teach ir
mode.
•
TRACK XX
: While the drawer is open, you may pre-select a track to
be played upon pressing play. Under these circumstances, the dis-
play shows only
TRACK
and the number of the track you have pre-
selected.
•
UNAVAIL
: You have tried to directly access a time or a track on the
disc that does not exist (example, 4:58 into a 3:00 song, or the 13
th
track on a disc that only has 12 tracks). (Remember that times de-
pend on the display mode you have selected, e.g., 5:55 when in the
time remaining on disc
mode means 5:55 from the end of the
disc.)
•
X-PAUSE
: The Nº37 has entered the Extended Pause mode, which
turns off the laser and internal transport mechanism; pressing Play
will spin up the disc and return you to where the unit went into
Pause; this mode is activated by either leaving the Nº37 in Pause
for a few minutes, or by pressing and holding the Pause button.
