35
Deleting a Track
from a Playlist
You may delete any selection from a playlist. To delete a selection:
1. Load a CD for which you’ve already saved a program (the letter
P
will appear preceding the track number on the Display); or load
an unprogrammed CD, then assemble a program.
2. Press
p
. The display will show the first selection in your
program.
3. Press
p
until the selection you want to delete appears on
the display.
4. Press
program –
; the display will remove the plus sign (+) from
the displayed track to indicate that it has been removed from the
playlist.
5. Repeat steps 3 and 4 for each selection you want to erase from
your program.
6. If you would like to make this change permanent,
press and hold
p
when you finish erasing selections from your program;
the display will show
REVISED
.
Adding a Track
to a Playlist
You also may add a selection to a previously saved playlist. To do so:
1. Load a CD for which you’ve already saved a playlist (the letter
P
will appear preceding the track number on the display); or load an
unprogrammed CD, then assemble and save a playlist.
2. Using the
next
and
previous
(or the numbered buttons on the Re-
mote Control), select the track you want to add to your playlist.
3. Add the selection to your playlist by pressing
p
. Your new
selection will be added to the end of your existing playlist.
4. Repeat steps 2 and 3 for each selection you want to add to your
program. Make sure to press
p
after each selection.
5. If you would like to make this change permanent,
press and hold
p
when you finish erasing selections from your program;
the display will show
REVISED
.
Overriding a Playlist
When you load a CD, the Nº37 reads its unique identification code. If you as-
semble a playlist for a particular CD
and
save it into the Nº37’s memory, the Nº37
“remembers” that CD’s playlist.
Even if you have previously saved a playlist for a CD, the Nº37 allows you to tem-
porarily override it (and have access to all tracks on the CD), without erasing it
from memory. You can even create a temporary playlist as an alternative to your
normal, permanent playlist.
To
temporarily
override a previously saved playlist, press
program –
. The
P
that
denotes playlist will be turned off. (If you change your mind, simply press
pro-
gram +
to restore the previously created playlist.) All of the CD’s tracks will sub-
sequently be accessible for normal operations, but the original playlist will still be
retained in the Nº37’s memory.
Erasing Playlists from Memory
To
permanently
erase a previously saved playlist from the Nº37’s memory,
press
and hold
the
program –
button; the display will show
ERASING
.
