Mark Levinson ?585, Quick Start Manual

SPECIFICATIONS

AMPLIFIER SECTION

Output Power:

200W RMS per channel @ 8 Ω, 20Hz – 20kHz

Damping Factor:

>400 @ 20Hz, referred to 8 Ω

Frequency Response:

20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB

Signal-to-Noise Ratio:

>98dB (20Hz – 20kHz, unweighted); >103dB (20Hz – 20kHz, A-wtd), 
referred to full output – maximum volume setting

Voltage Gain:

40.7dB (maximum volume setting)

Total Harmonic Distortion:

<0.01% @ 1kHz, 200W, 8 Ω; <0.1% @ 20kHz, 200W, 8 Ω

PREAMPLIFIER SECTION: ANALOG

Input Impedance:

>45k Ω (RCA & XLR)

Input Overload:

>5.5V RMS (RCA & XLR)

PREAMPLIFIER SECTION: DIGITAL

Sample Rates/Bit Depth (PCM):

32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz/up to 32-bit 

GENERAL

Analog Audio Connectors:

3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs 
(RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade 
lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)

Digital Audio Connectors:

1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 
1 asynchronous USB input (USB-B)

Control Connectors:

1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger 
output (1/8" phone jack), 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone 
jack); 1 Ethernet port (RJ-45 connector)

Mains Voltage:

100V AC, 115V AC, or 230V AC (factory-set)

Power Consumption:

Maximum 1000W (power on)

Unit Dimensions (H x W x D):

6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm)

Packaging Dimensions (H x W x D):

19" (483mm) x 26" (660mm) x 26" (660mm)

Weight:

72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging

SPECIFICATIONS

15

N

0

585 INTEGRATED AMPLIFIER

/

QUICK-START GUIDE