Inflating the tyres
Warning
•
The tyre pressures should be checked
each time before riding or at least once a
week.
•
Minimum and maximum air pressures are
marked on the sidewalls of the tyres.
•
Make sure that the tyre pressures are 50
PSI (3.45 Bar). If the tyre pressure is too
low, the wheel maybe get damaged or the
inner bicycle tube pinched, which may
result in a flat tyre. If the tyre pressure is
too high, it may come loose from the rim
and damage the bicycle or injure the rider
and people in close proximity.
•
It is recommended to use a bicycle pump
with built-in air pressure gauge to ensure
that your tyre always has the correct
pressure.
Gears
T
he gears should be used as with a
conventional bicycle. For starting and at
low speeds a lower gear is best. At higher
speed, a higher gear should be selected.
Reduce the pressure on the pedals during
shifting for smooth support and improved
range.
High speed, high gear.
Low speed, low gear.
The Shimano gear shift is smooth and easy
to use. The indicator on top shows the gear
you are using. To change up a gear press
the button once, going up one gear at a
time. To change down, push the lever, again
it is best practice to change down one gear
at a time while pedalin
g.
Summary of Contents for Step Thru
