•
Lubricate the chain with appropriate lubricant,
depending on the expected use;
•
Check if reflectors and lights are correctly
positioned and cleaned;
•
Check if the fittings important for the safety are
performed with the regulated torques, which are
indicated in the present instruction.
(!!!)
Do not use the eBike if you find worn, deformed
or damaged parts and mechanisms until you have
them repaired.
Tyres
T
he tyres should also be checked regularly for
damage and wear and tear level. Do not use the
eBike if there are any worn or damaged parts of the
tyres.
Replace tubes and tyres as soon as you have
discovered signs of wear or damage. Before
replacing the tubes, tyres and rim tape, you
must make sure that the new components are
compatible with the old ones. Preferably have
this operation carried out at a specialist service
centre.
The maximum air pressure of the tube when
inflating should be consistent with the specified
one on the tyre, exceeding this pressure should
be avoided.
Exceeding the allowable pressure results in
cushioning effect being lost, traction deterioration
as well as increasing the load on the tyre and the
rim which results in their rapid wear and damage.
Insufficient pressure involves risks of damaging
the wheel rim, the tyre structure, tyre pinching
and rupture of the inner tube, creating a higher
rolling resistance and requires more effort in
Summary of Contents for Step Thru
