(!!!)
Regardless of the circumstances, we
do not recommend and shall not be held
responsible for the safety of your eBike if
the following repairs and setup of the brake
system, the gear shift system, the straightening
of the wheel rims and the tensioning the
spokes have not been performed at a specialist
service centre.
The maintenance, regulation and repair can
significantly influence the safety of the eBike
and become a cause for severe injuries and
accidents.
After a long and demanding ride, or if the
eBike has been exposed to water or sand, we
recommend you:
•
Clean the eBike and carefully lubricate the
chain and gear unit always making sure to
remove the excess oil.
•
Inspect the frame, particularly in the tube
joint areas, the handlebar, the handlebar
stem and the seat post. If you notice deep
scratches, cracks or discolouration on their
surfaces, it means that they have been
subjected to excessive loads and should be
taken to a specialised service centre.
•
Squeeze the front brake lever and push the
eBike forward and backwards. If it does not
behave in a stable way, contact a service
technician for inspection and adjustment.
•
Check that the brake pads are not worn
beyond the thickness of the return spring.
•
If the pads are smooth rub them with sand
paper to roughen them to improve the bite
on the disc.
Summary of Contents for Step Thru
