DigiConvert Operating Instructions
Copying this document, or disclosing it to third parties is not allowed without our approval. This document must not be used in any abusive way by the receiver or third
parties. Fe Vogt GmbH
DigiConvert Operating Instructions
35 of 79
User administration
Calls the User administration page
When the operator logs in (see 9.3 Change of operator) the login data are sent to an external system
where they are checked. If the login data are valid, the external system provides the machine with the
corresponding user level that is assigned to the login data.
The machine automatically changes to this user level afterwards. Input boxes on the user system are
enabled or blocked depending on this user level.
The allocation of user levels to the input boxes is configured in this menu.
The menu is subdivided into the following areas:
Level
Pages
Name
List
Version
Area
Allocate
non-allocated
authorisations
Authorisations granted
Level name:
The level selected from the list can be renamed here.
Level list:
List of all user levels. The user level in the list marked in blue designates the user level that is currently
being configured.
If no user is logged in, level 0 is active.
