DigiConvert Operating Instructions
Copying this document, or disclosing it to third parties is not allowed without our approval. This document must not be used in any abusive way by the receiver or third
parties. Fe Vogt GmbH
DigiConvert Operating Instructions
48 of 79
•
Tensioning/relieving the reel core
•
Activating / deactivating the reeler
•
Entering the sense of rotation
•
Taking over the diameter
•
Web width in [mm]
•
Web tension in [N m]
Tensioning/relieving the reel core
Touch the reel core icon in the main menu to tension / relieve the reel.
The colour of the reel core changes accordingly.
Tensioned:
Relieved:
As soon as the reel core is relieved, the reeler is automatically deactivated.
Activating / deactivating the reeler
Press the button to deactivate the reeler. No more torque is generated at the reeling shaft.
Press the button again to activate the reeler. The torque required for the selected web tension is
generated at the reeling shaft.
The reeling shaft is tensioned automatically when the reeler is activated.
Entering the sense of rotation
Here you can enter the sense of rotation.
Reeling direction
Here you can specify whether the reeler is to be used to wind up or to wind off.
Taking over the diameter
The parameterised value results from a physical measurement that can be carried out by the operator.
After the diameter has been taken over, the input box automatically contains the specified value. The
specified value can be selected in the reeler submenu at start diameter.
Web width
Here you select the current web width.