DigiConvert Operating Instructions
Copying this document, or disclosing it to third parties is not allowed without our approval. This document must not be used in any abusive way by the receiver or third
parties. Fe Vogt GmbH
DigiConvert Operating Instructions
41 of 79
9.8.
Alarms
–
Historical View
Fig.: 12 Alarms
– historical view
To get to this page, press the button.
There can be various faults (system, axis) during regular operation. As a result, corresponding alarm
messages are generated and entered in the alarm list that is provided for this specific purpose. This
alarm list shows the last 1000 alarm messages. Pending alarms are shown in red; acknowledged
alarms in white.
Message and alarms
Here you can display the current or the historical alarm list.
Press the button to acknowledge the axis alarms.