Market Central, Inc.
R1000 NBS/NAC
Page 11 of 16
8. Web Interface (
SNMP capable models only
)
The network module provides access to console commands through a web browser interface. When enabled (see
SET WEBENABLE command) accessing the default page on the modules IP address (index.html) will present the
following page (or similar).
Note:
If using a pop up blocker on your web browser, be sure to allow pop ups from the IP address of the R1000,
otherwise you cold experience trouble receiving a response through the interface.
Web Interface Version 1.0
Copyright (c) 2003, Market Central Inc.
All rights reserved.
www.mctech.com
Please logon:
Password:
Submit
Figure 8.1 Logon Screen
After successfully entering the correct web password (see SET WEBPASSWORD command) you will get the
following page (or similar).
Web Interface Version 1.0
Copyright (c) 2003, Market Central Inc.
All rights reserved.
www.mctech.com
Command console:
Enter new command:
Send Command
Logoff
Figure 8.2 Initial Command Screen
At this point you may enter any valid command into the text box and click “Send Command” to execute. The
following is an example result of the GET ALL command.
Web Interface Version 1.0
Copyright (c) 2003, Market Central Inc.
All rights reserved.
www.mctech.com
Command console:
Output from last command...
System Status: B
IP Address: 192.168.1.30
