background image

Market Central, Inc. 

R1000 NBS/NAC 

Page 2 of 16 

Contents 

 

Chapter

 

Page

 

1. Specifications  

2. Introduction 

3. Configuration 

4. Installation 

5. Operation 

6. Network Setup 

7. Console Commands 

8. Web Interface 

11 

9. SNMP MIB Path Summary 

13 

 
1. Specifications 

 
Connectors: 

A/B Switches:  

Shielded RJ45 – 16, 24, 32, or 48 depending on model and size 

 

Fiber optic ST or SC – 4 or 6 duplex connectors depending on model and size 

Ethernet: 

Shielded RJ45 – active only in network manageable models 

Serial Control: 

Female DB9 

Power: 

Two-Position DC Power Entry – 2 provided for redundancy 

 

Indicators: 

Power supply LEDs: 

(2) power supply input 1, power supply input 2 

Switch position LEDs: 

(2) all ports position A, all ports position B 

Network status LEDS: 

(2) link, activity (active only in network manageable models) 

 

Switches: 

A/B Gang switch: 

(1) momentary toggle switch 

Gang Switch enable: 

(1) key-lock switch 

 

Power: 

9-12 VDC, 100 mA nominal (350mA nominal on network manageable models) 

RJ45 8 port, additional 187 mA while switching 
RJ45 16 port, additional 374 mA while switching 
Fiber Optic 4 port, additional 320 mA while switching 
Fiber Optic 6 port, additional 480 mA while switching 

Dual inputs for redundancy 

Physical: 

1.75”(H) X 17.25”(W) X 10.5”(D) desktop chassis, steel 
Mounting brackets provided for 1U, 19” rack mount configuration 
5 lbs, exc luding power supply 

 
MTBF: 

100,000 hours 

 
Altitude Tolerance: 

10,000 ft. (3048 m) 

 
Temperature Tolerance: 

Operating: 32° to 104° F (0° to 40° C) 
Storage: -4° to 158° F (-20° to 70° C) 

 
Humidity Tolerance: 

Up to 95% non-condensing 

 

Summary of Contents for 5101000

















Reviews: