11
3.
Make sure any accumulated gas has dispersed. Since propane gas is heavier than air, check near
the floor area for the odor of propane gas before attempting to light any pilot burners.
4.
Depress the red button on the safety valve and hold it in throughout the lighting procedure.
5.
Press the red button of the pilot igniter, and you should hear a snap and see a spark at the pilot
burner. If a spark or spark igniter is not present apply a lit match to the pilot burner head.
6.
Continue to depress the safety valve button until the pilot remains lit when released.
7.
If pilot is extinguished, repeat step 4 through 6 above.
8.
Turn the oven thermostat knob “on” and set to desired temperature setting, watch to make
sure the oven burner ignites from the pilot and that there are no yellow flames from the burner.
9.
Turn the oven thermostat to “off” and replace the lower kick plate.
NOTE:
It may be necessary to relight the pilot several times until the lines are purged of any trapped
air and a constant gas flow is attained.
