15
WASH-1 USER GUIDE
6.
The
In Progress
tab displays how long parts have been washing and drying in the Wash-1 station.
When you have finished transferring the parts to the drying chamber, select them from the Washing list.
Click
Dry Selected
to indicate that the drying process has begun. The parts will immediately be
removed from the Washing list and added to the Drying list below.
7.
The
Drying
section is also timed and will show you how much time the part needs to remain in the drying
state. When your parts have completed the drying stage, select the parts in the Drying section.
8.
Scroll to the top of the page and select
Mark Selected as Done
on the top right corner of the page to
immediately send the selected parts to the
Wash History
tab.
9.
To access the Wash History page and see all washed parts, select
Wash History
on the top of the Wash
Overview page.
10.
Calculate the percentage mass loss of your part, according to the flowchart on page 12. If there is
insufficient mass loss: select
Additional Wash Time
from the Actions drop-down menu for that part,
enter the current brown mass, and begin the wash process again. Otherwise, continue on to the next
step.
