marklin 37791, User Manual

12

Functions

•  Recognition of the mode of operation: automatic.
•  1 high-performance motor fitted to each locomotive; it is 

controlled by the central drive electronics. 

• 

Fitted pickup shoe switching. Accordingly, the engines al-

ways receive their supply voltage from the front locomotive.

•  Addresses that can be set: 01 – 255 / Control Unit 01 – 80
•  Address set at the factory: 

77 

•  Mfx technology for the Mobile Station / Central Station.

Name set at the factory: 

THALYS PBKA

•  Adjustable acceleration (ABV).
•  Adjustable Braking delay (ABV). 
•  Adjustable maximum speed.
•  Setting the locomotive parameters (address, acceleration/

braking delay, maximum speed): with the Control Unit,  

Mobile Station, Central Station.

•  Headlights, changing over with the direction of travel. 
•  Only the train control functions and headlight changeover 

feature are available in analog operation. 

No warranty or damage claims shall be accepted in those cases where 

parts neither manufactured nor approved by Märklin have been installed 

in Märklin products or where Märklin products have been converted in 

such a way that the non-Märklin parts or the conversion were causal to the 

defects and / or damage arising. The burden of presenting evidence and 

the burden of proof thereof, that the installation of non-Märklin parts or the 

conversion in or of Märklin products was not causal to the defects and / or 

damage arising, is borne by the person and / or company responsible for 

the installation and / or conversion, or by the customer. 

Safety Notes

•  This locomotive is to be used only with an operating 

system designed for it (Märklin AC, Märklin Delta,  

Märklin Digital or Märklin Systems).  

•  Use only switched mode power supply units and transfor

-

mers that are designed for your local power system.

•  This locomotive must never be supplied with power from 

more than one transformer. 

•  Pay close attention to the safety notes in the instructions 

for your operating system.  

•  The feeder track must be equipped to prevent interference 

with radio and television reception, when the locomotive 

is to be run in conventional operation. The 74046 interfe-

rence suppression set is to be used for this purpose.

• 

WARNING!

 Sharp edges and points required for operation.

•  Do not expose the model to direct sunlight, extreme 

changes in temperature, or high humidity.

General Notes

•  The operating instructions and the packaging are a com

-

ponent part of the product and must therefore be kept as 

well as transferred along with the product to others.

•  Please see your authorized Märklin dealer for repairs or 

spare parts. 

•  http://www.maerklin.com/en/imprint.html