4
Function
This locomotive comes with a sine propulsion system and offers
these features:
• Possible operating systems: 6646/6647 Märklin Transformer,
Märklin Delta, Märklin Digital, Märklin Systems.
• Recognition of the mode of operation: automatic.
• Addresses that can be set (Control Unit): 01 – 80
Address set at the factory:
29
• Mfx technology for the Mobile Station / Central Station.
Name set at the factory:
BR 294 075-7
• Adjustable acceleration (ABV).
• Adjustable Braking delay (ABV).
• Adjustable maximum speed.
• Telex coupler (remote controlled uncoupler unit).
• Setting the locomotive parameters electronically with the
Control Unit, Mobile Station or Central Station.
• Brushless motor, needs no servicing.
Telex coupler as a working function:
The Telex coupler is activated by pressing on the button on a
locomotive controller (see Page 11). The Telex coupler shuts
off automatically after about 30 seconds. After the
uncoupling
procedure is completed
, this function must also be deactivated
with the button on the locomotive controller.
Note:
If the uncoupling procedure is shut off too early, the
coupler may not be locked. It is possible that it will not couple to
another coupler. This problem can be corrected by activating/
deactivating the coupler again
(uncoupled)
.
Safety Warnings
• This locomotive is to be used only with an operating system
designed for it (Märklin 6646/6647 AC transformer,
Märklin Delta, Märklin Digital or Märklin Systems).
Use only transformers rated for your local household
power.
Do not under any circumstances use transformers rated
for 220 volts or 110 volts.
• This locomotive must never be supplied with power from more
than one transformer.
• Pay close attention to the safety warnings in the instructions
for your operating system.
• The feeder track must be equipped to prevent interference
with radio and television reception, when the locomotive is
to be run in conventional operation. The 74046 interference
suppression set is to be used for this purpose.
The maintenance work necessary with normal operation of
this locomotive is described below. Please see your authorized
Märklin dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in those cases where
parts neither manufactured nor approved by Märklin have been installed
in Märklin products or where Märklin products have been converted in
such a way that the non-Märklin parts or the conversion were causal to the
defects and / or damage arising.
The burden of presenting evidence and the burden of proof thereof, that the
installation of non-Märklin parts or the conversion in or of Märklin products
was not causal to the defects and / or damage arising, is borne by the per-
son and / or company responsible for the installation and / or conversion,
or by the customer.
WARNING!
This product contains magnets. Swallowing more than one
magnet may cause death in certain circumstances. If necessary, see a
doctor immediately.
!
