17
Betrieb • Operation • Fonctionnement
Exploitatie • Operación • Operazione
( )
Values = factory settings
DCC: programming on the programming track by means of CV programming,
programming with PoM (Program on the Main); this must be supported by the controller you are using.
*
The values for the desired setting must be added!
Example: The number of speed levels 28/128 = 2 + DCC operation with a braking route = 4, results in the value = 6
CV
Discription
6021 Value
DCC Value
63 PoM Volume
01 – 63 (63)
0 – 255 (255)
64 PoM Brake threshold
0 – 255 (55)
75
Address 2 (1st consecutive address)
01 – 80 (25)
—
138 PoM Volume for sound "squealing brakes"
—
0 – 255 (255)
139 PoM Volume for sound "operating sounds"
—
0 – 255 (255)
140 PoM Volume for sound 1 (whistle)
—
0 – 255 (255)
143 PoM Volume for sound 4 (tation announcements)
—
0 – 255 (255)
146 PoM Volume for sound 7 (Sanding )
—
0 – 255 (255)
150 PoM Volume for sound 11 (Compressor)
—
0 – 255 (255)
151 PoM Volume for sound 12 (Couplers)
—
0 – 255 (255)
152 PoM Volume for sound 13 (Couplers)
—
0 – 255 (255)
153 PoM Volume for sound 14 (Pantograph)
—
0 – 255 (255)
154 PoM Volume for sound 15 (Pantograph)
—
0 – 255 (255)
155 PoM Volume for sound 16 (Letting off air)
—
0 – 255 (255)
