marklin 55414, User Manual

16

Betrieb • Operation • Fonctionnement

Exploitatie • Operación • Operazione

•   The warranty card included with this product specifies the warranty 

conditions. 

•   Disposing: www.maerklin.com/en/imprint.html 

Functions

•   The mode of operation (AC/DC, Mfx, Märklin Motorola, or DCC) is 

recognized automatically.

•   Mfx technology for the Mobile Station / Central Station.

Name set at the factory: 

41 356

•  Possible addresses: 

1-80   (Control Unit 6021)  

1-255 (Central Station 6021x)  

01 – 9999 DCC

•  Address set at the factory: (Märklin)

 44 & 45 / (

DCC)

 3

•  Setting locomotive parameters (address, acceleration/braking delay, 

maximum speed, etc.): with the Control Unit and DCC (CV program-

ming), Mobile Station, or the Central Station.

•  Headlights, changing over with the direction of travel. 
•   Individual smoke functions can be activated with the sound func

-

tions when the smoke is turned on (see page 39).

•   When the locomotive is running, the control rod on the right side of the 

locomotive is shifted prototypically in 5 positions by means of a motor. 

•   The doors on the locomotive and the tender can be replaced by doo

-

rs included with the model (Page 36). The larger doors may cause 

problems when the locomotive is running.

•  The model is designed for operation on Märklin 1 Gauge track. As the 

consumer you assume the risk for operating on other makes of track. 

•  Minimum radius for operation: 1020 mm / 40-1/6“. 
•   Only the train control functions and headlight changeover feature 

are available in analog operation. 

Safety Notes

•   This locomotive is to be used only with an operating system desi

-

gned for it (DC power = 18V±, Märklin AC, Märklin Digital,  

Märklin Systems). 

•   Use only switched mode power supply units and transformers that 

are designed for your local power system. 

•   This locomotive must never be supplied with power from more than 

one transformer. 

•   Pay close attention to the safety notes in the instructions for your 

operating system. 

•  The feeder track must be equipped to prevent interference with 

radio and television reception, when the locomotive is to be run in 

conventional operation. The 104770 interference suppression set is 

to be used for this purpose.

•   The wire used for feeder connections to the track may only be a 

maximum of 2 meters / 78 inches long. 

•   Do not expose the model to direct sunlight, extreme changes in 

temperature, or high humidity. 

•  

WARNING!

 Sharp edges and points required for operation. 

•   The LEDs in this item correspond to Laser Class 1 according to Stan

-

dard EN 60825-1.

Important Notes

•   Due to the high power requirements for this heavy locomotive, there 

are only limited possibilities for operation with the 60652 Mobile Station.

•   The operating instructions are a component part of the product and must 

therefore be kept as well as transferred along with the product to others. 

•   Please see your authorized Märklin dealer for repairs or spare parts.