marklin BR 132, Manual

8

•  Maintenance, servicing, and repairs may only be done by 

adults.

•   Please see your authorized Märklin dealer for repairs or 

spare parts. 

•  The warranty card included with this product specifies 

the warranty conditions. 

3. Contents

  1 x Locomotive
  1 x Set of instructions for use
  1 x Warranty card

4. Functions

•  Recognition of the mode of operation: automatic.
•   Mfx technology for the Mobile Station / Central Station. 

Name set at the factory: 

132 439-1

•  Addresses that can be set:  

1-80

   (Control Unit 6021/Mobile Station 60651/652)   

1-255

 (Central Station 6021x/Mobile Station 60653)

•  Address set at the factory: 

24

•  Adjustable acceleration/braking delay (ABV). Adjustable 

maximum speed.

•  Setting the locomotive parameters (address, accelerati-

on/braking delay, maximum speed): with the Control Unit, 

Mobile Station, Central Station.

•  Headlights, changing over with the direction of travel. 
•   Only the train control functions and headlight changeover 

feature are available in analog operation. 

Märklin Start up can be added to and expanded with Märklin 

1. Using the Product as Intended 

This locomotive is to be used only with an operating system 

designed for it (Märklin AC, Märklin Delta, Märklin Digital or 

Märklin Systems).  

2. Safety Notes

Make sure you read the following safety notes before using 

this Märklin product for the first time.
•   Use only switched mode power supply units and transfor-

mers that are designed for your local power system. 

•   This locomotive must never be supplied with power from 

more than one transformer. 

•   Pay close attention to the safety notes in the  

instructions for your operating system.  

•  The feeder track must be equipped to prevent interference 

with radio and television reception, when the locomotive is 

to be run in conventional operation. The 74046 interference 

suppression set is to be used for this purpose.

• 

WARNING!

 Not suitable for children under 3 years. Sharp 

edges and points required for operation. Danger of choking 

due to detachable small parts that may be swallowed.

•   Do not expose the model to direct sunlight, extreme 

changes in temperature, or high humidity. 

•  The LEDs in this item correspond to Laser Class 1 accor-

ding to Standard EN 60825-1.

2.1 Important Notes 

•   The operating instructions and the packaging are a com-

ponent part of the product and must therefore be kept as 

well as transferred along with the product to others.