Marks & Spencer MS2751DVB, User Manual

Menu Operation

1. Press 

VOL+/-

 to adjust the volume.

2. If you want to switch the sound OFF, press the 

MUTE

3. You can cancel this function by pressing MUTE or VOL+ button.

Basic TV operation

First time installation

Using the CH+/- on the front panel or on the remote control.

     Press 

CH+

 to increase channel number.

     Press 

CH-

to decrease channel number.

 9

NOTE: When you initially use the TV, you will see the “

First Time Installation

” menu as below:

Ensure that the aerial is plugged into the TV, 
Make sure your Remote is in TV mode (by 
pressing        button), switch on the TV by 
pressing        . You will see the first time 
installation menu.

Press the        button on the remote control to 
start the tuning procedure. This process will 
find all available ATV and DTV channels and 
store them.

By pressing the Quick Start button the first 
time installation can be recalled at any time.

TV

TURN ON LCD TV

TURN OFF LCD TV

1.Connect power cable to mains supply and turn on the power by using the “ Switch” at the back of

 the TV on the right hand side. The standby indicator on the front of the TV will light up in red.

2. Press the 

POWER

 button on the top of the TV or the 

 button on the remote control to 

turn on the TV, the indicator will light green.

Press the 

POWER

 button on the top of the TV or the 

 button on the remote control to turn 

the TV off into standby mode,  the indicator will light red.