1. INITIALIZE LOCK
Initializing the lock with a unique 6 digit code assigns a
LOCK ID
number to each specific lock.
Using keypad, enter the
FACTORY CODE (9991234)
, the
#
key, and the 6 digit
LOCK ID
(usually starting with 000001), and finally, the
#
key.
The LOCK ID will NOT open the lock.
2. Create GREAT GRAND MASTER (GGM) using the PROX card
Using the keypad, enter the
FACTORY CODE (9991234)
,the
✳
key, the
UID
(either 2,3 or 4 digits), the
#
key,
and finally present the
PROX
card to the antenna housing. The LED flashes green and the lock beeps.
The GGM is now established for the SYSTEM MANAGER only:
Enter the UID
✳
followed by the PROX to test the lock access.
Lock is now initialized.
SYSTEM MANAGER'S ACCESS TO THE LOCK:
Enter UID plus
✳
key,
PROX
card
SYSTEM MANAGER'S ENTRY TO PROGRAMMING MODE:
Enter UID plus
#
key,
PROX
card
In addition to the use of the PROX card to program or access the lock, the keypad may be used as an alternate
method to accomplish those same functions.
Consult
IQK* PROGRAMMING MANUAL
for complete instructions for keypad operation.
UID (2 ,3, or 4 digits)
#
PROX CARD
Example:
123 #
PROX CARD
UID (2 ,3, or 4 digits)
✳
PROX CARD
Example:
123
✳
PROX CARD
Factory code
✳
UID (2 ,3, or 4 digits)
#
PROX CARD
Example:
(9991234)
✳
123
#
PROX CARD
Factory Code
#
6 digit Lock ID
#
Example:
9991234 #
000001
#
Page 2
