Marks USA
• www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 •
© 2009, Marks USA
1
IMPORTANT KEYS:
TERMINATOR KEY
( ):
Acts like the
“Enter” key on a computer, and is used to confirm entries on the keypad.
PROGRAMMING KEY
(#):
After a valid Master Code is entered, this key is depressed to enter the programming mode.
NOTE: At the end of any programming series, replace the last
with a # to return to function number input.
This allows the programmer to perform multiple functions without having to re-enter the Master Code for each function.
LED INDICATOR:
LED INDICATING
GREEN (NORMAL MODE):
1.
Denotes lock enabled to open. Will flash green after valid entry and terminator key (
LED INDICATING
RED (NORMAL MODE):
1.
Denotes a wrong code entry.
2.
Three consecutive wrong entries will disable keypad for 20 seconds. If another wrong code is entered, the keypad is
disabled for 40 seconds. This is indicated by a solid red light.
LED INDICATING
RED (PROGRAMMING MODE):
1.
Denotes incorrect entry and vacates programming mode.
2.
Programming mode vacated if no key entry within 5 seconds.
CREATE MASTER CODE
This code is required to perform all programming functions. The number of digits used for the User ID and PIN of each additional
user must be the same as the Master Code.
Enter 9991234
(User ID)
#
(PIN)
#
User ID and PIN followed by
will open the lock.
GROUPS
ALL USERS MUST BE ASSIGNED TO A GROUP.
Users in the same group will have the same access rights.
Each group is assigned a 2 digit group number from 02 to 99.
The Master Code is automatically assigned to group 01, and has full programming rights.
GROUPS 02-08:
Management groups with 24/7 access.
GROUP 09:
Group that allows the lock to be placed in passage mode when the code is entered. The lockset will re-lock when code is
entered again or at midnight of that day.
GROUPS 10-99:
No programming rights. They may, however, change their own PIN. (See
“Change User PIN” on page 2)
TO ADD USERS
Enter Master Code (User ID and PIN), the
#
key, (01), the key, the User ID you wish to add, the key, the 2 digit group number, the
key, the new PIN, and the key twice.
ADD USER CODE
Enter MASTER CODE
#
01
(User ID)
10
(PIN)
User ID and PIN followed by ( ) will open the lock.
TO DELETE USERS
Enter Master Code (User ID and PIN), the
#
key, (01), the key, the User ID you wish to delete, the key, (0), and the key twice.
DELETE USER CODE
Enter MASTER CODE
#
01
(User ID to be Deleted)
0
