9991234
UID #
PROX
MASTER UID # PROX
01
UID
Group No.
Prox
Enter to open lock
UID of GGM
PROX
2. CREATE GREAT GRAND MASTER (GGM):
This code is required by the SYSTEM MANAGER to perform all programming functions. In any lock system the number of digits used for
the UID of each User must be the same as the GGM.
Example: If the GGM’s code is 3 digits, all Users must have a 3 digit UID code.
Using keypad, enter the FACTORY CODE 9991234, the key, the UID of the system manager (either 2, 3 or 4 digits), the # key,
and the PROX of the system manager.
FACTORY CODE S UID # PROX
SYSTEM MANAGERS ACCESS TO THE LOCK:
Enter UID, the key, then PROX. The lock will open!
The GGM is now established for the SYSTEM MANAGER only: A combination of their UID followed by their PROX.
Lock is now initialized.
2
GROUPS:
In order to organize the management of individual Users, they can be put into 98 different GROUPS. Users in the same GROUP will have
the same access rights. Users in different GROUPS can have varied access rights from other GROUPS.
Each GROUP is assigned a 2 digit GROUP NUMBER from 02 to 99.
ALL USER MUST BE ASSIGNED TO A GROUP
.
Depending on your assigned GROUP, you may or may not be able to program the lock, and may also have restricted access.
The SYSTEM MANAGER is automatically assigned to group 01, and can assign Users to all other groups. GROUPS 02 through 08 are
management GROUPS, with 24/7 access to the locks, and can change various settings used during access by other User GROUPS.
The Table of Contents (inside front cover) lists the minimum GROUP NUMBER required for rights to program EACH specific function.
Higher GROUPS can override access functions of lower GROUPS.
Example: GROUP (02) can override access functions to GROUP (03), etc.
GROUP 09 is a special group that allows the lock to be placed in passage mode when the code is entered. The lockset will re-lock when
code is entered again or at midnight of that day.
GROUPS 10 through 99 have no programming rights. Their access may be restricted by schedules or during holidays.
They may, however, change their own PROX when authorized by the SYSTEM MANAGER.
FUNCTION 01:
To Add Users:
Enter MASTER CODE, UID, the # key, PROX, FUNCTION NUMBER (01), the key, the Users UID you want to include in
the GROUP, the key, the 2 digit GROUP NUMBER, the key, present User’s PROX card, the key.
Marks USA • www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 •
© 2009, Marks USA