background image

Closed - Locked - Default

MASTER UID # PROX

30 

Open - Unlocked

MASTER UID # PROX

30 

FUNCTION 30: Manual Passage Mode  . . . . . . . . . . . . . . .

Min. Group Number: Master 03

This function puts the lock in an unlocked state, granting free access 

(no code required)

to all Users, until lock is returned to the locked state.

Returns to locked state at midnight. 

Audio Off

MASTER UID # PROX

34 

Audio On - 

DEFAULT

MASTER UID # PROX

34 

For Normally Open (NO)

MASTER UID # PROX

35 

For Normally Closed (NC)

MASTER UID # PROX

35 

Lock Fails In The Last State That It Was In When The Power Was Lost - Default

MASTER UID # PROX

36 

Fail Secure - Lock Will Ensure That Power Is Reserved To Fail In The Locked Or Secured Position

MASTER UID # PROX

36 

Fail Safe - Lock Will Ensure That Power Is Reserved To Fail In The Unlocked Or Safe Position

MASTER UID # PROX

36 

FUNCTION 36: Fail Safe/Fail Secure  . . . . . . . . . . . . . . . . .

Min. Group Number: Master 03

Use this function to create a power reserve to ensure if the Low Battery Warning is not heeded, and the battery pack fails, the lock will fail
in the selected state. 

FUNCTION 34: Lock Audio . . . . . . . . . . . . . . . . . . . . . . . . .

Min. Group Number: Master 03

If the Audio is set to "ON" the lock will beep with each key pressed (on by default).

FUNCTION 35: Relay State Selection  . . . . . . . . . . . . . . . .

Min. Group Number: Master 03

The following function applies to the state of the relay as follows.

Marks USA • www.marksusa.com • 631-225-5400 • 800-526-0233 • Fax: 631-225-6136 • 

© 2009, Marks USA

Summary of Contents for i-Qwik PROX Series

















Reviews: