Rutland 504 Windcharger Installation & Operation
Doc No: SM-150 Issue C 17.03.14 6 Marlec Eng Co Ltd
Other Items You May Have Selected
x
A Rutland Charge Regulator from our range
x
Cable (usually 2.5mm² twin core - Part No 902-015)
x
Rutland 503/504 Marine Mounting Kit and Stays Kit ( CA-12/01 & CA-12/32 )
x
Rutland 503/504 Land Tower Kit & Rigging Kit ( CA-12/12 & CA-12/13 )
x
Short section of stainless steel tube to adapt into your own mounting design
What You Will Need -Tools
x
Suitable wire stripper
x
Small terminal screwdriver
x
Large flat blade screwdriver
x
Crosshead screwdriver
x
10 mm spanner or socket
Other Items
Other Items You Will Need
x
Mounting pole and stays
x
Cable
x
Batteries
x
Battery Terminals
x
Connector Blocks (as determined by
your total system)
Nose Cone with
3 x snap rivets
Safety Turbine -
The
blades incorporating
the outer ring must
not be tampered with
or altered.
Post Adaptor Assembly -
This fits into a pole of
31.7mm internal
diameter and NO MORE
THAN 38.1mm external
diameter.
Nacelle containing
Windshaft Assembly
Tail Fin Assembly
with 2 x M6 x 12
Hex. Head screws,
spring washers
and plain washers.
Check You Have Received
-
See Rutland 504 Exploded View
1 x in line fuse holder and fuse (only required when HRS 503 Regulator fitted)
1 x safety turbine with main generator assembly
1 x nose cone + 3 x snap rivets
1 x tail fin as 2 x M6 hex head screws
1 x 5 mm Allen key
1 x 2-way terminal block
2 x M8 x 16 button cap screws
2 x shakeproof washers
Exploded View of Rutland 504 Models
Summary of Contents for Rutland 504 efurl
Page 2: ......
