background image

4

L1

L1

L2

L2

GROUND

GROUND

WHITE OR BLACK

ELEMENT

SAFETY

LIMIT

ELEMENT

L1

L1

L1

L2

L2

L2

GROUND

GRND

FACTORY WIRING
FIELD WIRING

WHITE OR BLACK

SAFETY

LIMIT

L1

L2

L1

L1

L2

L2

GRND

GROUND

WHITE OR BLACK

ELEMENT

SAFETY

LIMIT

L1

L1

L2

L2

GROUND

GROUND

WHITE OR BLACK

ELEMENT

SAFETY

LIMIT

FACTORY WIRING
FIELD WIRING

ELEMENT

L1

L1

L1

L2

L2

L2

GROUND

GRND

WHITE OR BLACK

SAFETY

LIMIT

FACTORY WIRING
FIELD WIRING

Orange wire nut
(Disconnect for left side
supply wiring)

Safety limit in left side  

DO NOT BYPASS

Orange wire nut
(Disconnect for right side
supply wiring)

Factory Wiring Shown

Left End Supply Wiring

Connection For Adjacent Heaters

Right End Supply Wiring

Note: Heater element leads are color coded by voltage- 

Yellow

120V

Blue

208V

Red

240V

Brown

277V

*

*

**

**

Figure 5: Wiring Diagrams

*

NOTE:

White for 120V & 277V
Black for all others

02/11

Part No. 5200-2194-010

ECR39036

LIMITED WARRANTY

All products manufactured by Marley Engineered Products are warranted against defects in workmanship and materials for one year from date of installation, except 
heating elements which are warranted against defects in workmanship and materials for ten years from date of installation. This warranty does not apply to damage from
accident, misuse, or alteration; nor where the connected voltage is more than 5% above the nameplate voltage; nor to equipment improperly installed or wired or 
maintained in violation of the product’s installation instructions. All claims for warranty work must be accompanied by proof of the date of installation.

The customer shall be responsible for all costs incurred in the removal or reinstallation of products, including labor costs, and shipping costs incurred to return products
to Marley Engineered Products Service Center. Within the limitations  of this warranty, inoperative units should be returned to the nearest Marley authorized service cen-
ter or the Marley Engineered Products Service Center, and we will repair or replace, at our option, at no charge to you with return freight paid by Marley. It is agreed that
such repair or replacement is the exclusive remedy available from Marley Engineered Products.

THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM
THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH RESPECT TO THE 
PRODUCT, WHETHER BASED UPON NEGLIGENCE, TORT, STRICT LIABILITY, OR CONTRACT.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary from state to state.

For the address of your nearest authorized service center, contact Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328. Merchandise returned to the fac-
tory must be accompanied by a return authorization and service identification tag, both available from Marley Engineered Products. When requesting return authorization,
include all catalog numbers shown on the products.

HOW TO OBTAIN WARRANTY SERVICE AND 
WARRANTY PARTS PLUS GENERAL INFORMATION

1. Warranty Service or Parts

1-800-642-4328

2. Purchase Replacement Parts

1-800-654-3545

3. General Product Information

www.marleymep.com

Note: When obtaining service always have the following:

1. Model number of the product
2. Date of manufacture
3. Part number or description

470 Beauty Spot Rd. East
Bennettsville, SC  29512 USA

Note: For multiple heaters on one circuit, the heaters must be wired in parallel

Summary of Contents for 2500 & C2500 Series













Reviews: