Step 3 Setting the security code
You need to set a security code for the Mobile SMS Guard 300, so that the module can com-
municate with the alarm sensors.
•
Towards the top left of the SIM card holder, you can see a black square with 8 jump
switches. These together form the security code for your alarm system. See figure 3.
•
Set the 8 switches in a random way and write down the security code. Later you will
need this code to set the door/window sensors!
•
Replace the flap and tighten the screws.
Step 4 Installing the Mobile SMS Guard 300
Figure 4
•
Screw the antenna included onto the antenna connector, on the left side of the module.
•
Make sure the antenna is placed upright. (It needs to point upwards.)
•
Select a suitable place for the base station. Make sure there is a wall socket nearby (230 V).
•
Connect the power adapter to the Mobile SMS Guard 300 module (left) and plug the
adapter into the wall socket.
•
For optimal reception, place the base station as central as possible in relation to all
objects that you want to secure. This way, the distance between the base station and
the sensors is as small as possible.
Make sure that:
•
The base station is not placed too close to large metal objects (radiators, cooker, etc).
•
You have easy access to the base station.
•
The base station is not placed too close to other electronic equipment, such as a
telephone switch board, computer or TV.
You can place the base station on any flat surface (table, sideboard, etc) or mount it
onto the wall. The antenna has a magnetic base.
Mounting the station onto the wall
•
The base station can be mounted using two screws. The back of the station has two
screw holes (heart-heart distance 145 mm). Screws are not included.
Placing the station on a flat surface
•
If you choose not to mount the station, place it on a flat surface.
Activating the module
•
Switch on the Mobile SMS Guard 300 module by pressing the ON/OFF button on the
left-hand side (0= OFF, I = ON). The display now reads: ‘GSM SECURITY’. The module
now counts back from 90 seconds to 0. After the countdown, the following text
appears: ‘Normal Detect SW: OFF’. The ‘System’ LED also flashes every second.
The ‘GSM’ LED starts flashing every second, and after +/- 20 seconds every 3 seconds.
5
MOBILE SMS GUARD 300
ENGLISH
Figure 3
20112_121005_MobileSMSGuard300 06-06-2006 14:40 Pagina 5
Summary of Contents for Mobile SMS Guard 300
