Marmitek robodome10, Quick Installation Manual

SAFETY WARNINGS 

x

All the safety and operating instructions should be read before the units is operated. 

x

The wiring of your electrical installation is live (230 V) and extremely dangerous. Never 
connect the module when plugged into the mains. Always turn off the main switch 
before starting the installation. Precautions for anti-lightning and anti-surging should 
be taken if necessary. 

x

During the course of transportation, storage and installation, the product should be 
avoided from incorrect operations such as heavy pressing, strong vibration etc., which 
can cause damage of the product as there are sophisticated optical and electronic 
devices inside the machine. 

x

This product is for professional use and should be installed by a certified installer. 

x

Do not operate it in case temperature, humidity and power supply are beyond the 
limited stipulations. 

x

Do not place this unit on an unstable stand, 
tripod, bracket, or mount. The unit may fall, 
causing serious injury to a person and 
serious damage to the unit. Use only with a 
stand, tripod, bracket, or mount 
recommended by Marmitek or sold with the 
product. Any mounting of the unit should 
follow the manufacturer’s instructions and 
should use mounting accessory 
recommended by manufacturer.  

x

If necessary, use a commercial lens cleaning 
paper to clear the lens windows. Gently wipe 
the lens window until clean. 

x

In case of improper usage or if you have altered and repaired the product yourself, all 
guarantees expire. Marmitek does not accept responsibility in the case of improper 
usage of the product or when the product is used for purposes other than specified. 
Marmitek does not accept responsibility for additional damage other than covered by 
the legal product responsibility. 

x

This product is not a toy. Keep out of reach of children.

RoboDome 10 

3