Trawl Explorer | V7 | System Configuration and Display
Procedure
1.
From the top left corner of the screen, click
Menu
>
Customize
and enter the password
eureka
.
2.
To display the echogram view:
a)
Open the control panels, then go to
Sensors Data
/
Mx
.
b)
In
Trawl Explorer
, click and hold
Range of Sonar Data
for 3 seconds until a rectangle
appears and drag it to a page.
3.
Again, in
Trawl Explorer
, drag other data to the page such as depth, trawl opening, pitch and
roll. Each time you drop a data to the page, you can choose its display format.
Figure 1: Example of Trawl Explorer display
4.
If using Down only mode and if the
trawl opening
configured for the sensor is under
20 meters, the sounding range automatically changes to 20 meters if the distance to the bottom
|
38
Summary of Contents for NBTE V1
Page 1: ...Trawl Explorer User Guide...
Page 2: ......