Marquant 002-121, Operating Instructions Manual

EN

23

7.  Reset
8.  Equalizer
9.  Track number

     FIG.   2

ASSEMBLY

Mount the speaker on the base plate using the 
supplied screws and washers.

     FIG.   3

USE

Insert the battery in the remote 
control

1.  Hold the remote control with the rear 

facing upwards.

2.  Remove the battery holder from the remote 

control. 

3.  Insert the battery with positive terminal (+) 

upwards. 

4.  Refit the battery holder.

     FIG.   4

Basic settings

5.   Start the speaker by pressing 

 either on 

the speaker or the remote control. A LED 
indicator lights green when the speaker is 
on. The light goes off when the speaker is 
switched off.

6.   Press repeatedly on 

MODE

 on the speaker 

or remote control to switch between 
playback sources. The equivalent LED 
indicator lights green.

7.   Press 

VOL+/VOL–

 on the speaker or 

+/–

on 

the remote control to adjust the volume.

8.   Press 

EQ

 to set the required Equalizer-

mode.

9.   Press 

 on the remote control to mute 

the sound.

10.  Press 

 again to activate the sound.

AUX mode

1.   Connect one end of the AUX cable with a 

3.5 mm jack to the headphone socket on 
the unit.

2.   Connect the other end of the AUX cable to 

the AUX connection on top of the speaker.

3.   Start the speaker with 

.

4.   Press repeatedly on 

MODE

 on the speaker 

or remote control until the AUX indication 
lights green.

5.   Control the music with the controls on the 

connected unit.

     NOTE:   
The speaker controls (except MODE) cannot 
be used when a unit is connected to the AUX 
connection.

Playback from USB device/SD card

1.   Connect a USB device to the USB port or 

insert a SD card in the SD card slot on the 
speaker to play MP3 music files.

     FIG.   5

2.   Start the speaker with 

. 

3.  Press repeatedly on 

MODE

 on the speaker 

or remote control until the LED indication 
for USB/SD card lights green.

4.   Press 

 to pause.

5.  Press 

 again to resume playback.

6.  Press 

 to go to the next track and on 

 to go to the previous track.

7.  Select the desired track using the numeric 

keys. For example, press 2 + 1 to select track 
21.