S P A M A I N T E N A N C E S C H E D U L E
M A R Q U I S S P A S • R E L A X I N G Y O U R W O R L D 6 3
DAILY
Replenish the water level by filling 2/3 up the Vortex skimmer opening(s). (See
STARTING YOUR SPA section.)
Check the water balance. Adjust as needed.
WEEKLY
Wipe down the embossed tile.
Remove the filter cartridge(s) and rinse thoroughly with a hose and high-pressure
nozzle.
MONTHLY
Soak the filter cartridge(s) in
Marquis Spa Care
Filter Revive
. Rinse thoroughly in clean
water.
Clean the spa Safety Energy Cover with
Marquis Spa Care
Cover Cleaner.
EVERY THREE MONTHS
Drain the spa and completely refill with water and replenish the chemicals. (See
DRAINING AND REFILLING YOUR SPA.)
Open the equipment door and check for signs of water leakage around the pump(s).
Pump seals will wear out over time, especially with improper water chemistry. Early
detection of pump seal failure can significantly reduce repair costs.
While the spa is drained, the DuraShell
®
interior can be sponged with a spa cleaner
and rinsed.
NOTE:
Do not wax the surface as the wax will dissolve into the water, clog the
filter, and reduce the effectiveness of Microban
®
antibacterial product protection.
EVERY SIX MONTHS
If your spa has a wood exterior, treat the wood with the
Super Deck Wood Care Kit
.
NOTE:
Do not use wood sealant. Use only a high-quality, water-based wood
preservative.
