HOT TUB CONTROLS
Jets 2:
If equipped, touching this button once will turn on to
low speed. You will know it is on when a white ring around
the button is present. Touching the button a second time
will turn the pump on to high speed. You will see the internal
jet bubble icon increase in size. Touching the button again
will turn the pump off. If left on, high speed will run for 15
minutes and then switch down to low speed for 15 minutes
before turning off.
MicroSilk
®
:
If equipped with this option, touching the MicroSilk button will turn on this special
feature and run for 30 minutes. You will know it’s on when a white ring is present around the
button. Note that all other pumps will shut off after a few minutes in order for the feature to work
as designed. Touching the button again will turn off the feature and allow control of the other
pumps to be resumed.
Light:
Touching this button will turn on the interior LED
lights. Touching this button repeatedly will cycle through an
array of colors options. ouch the button to turn off the lights
at any point. If left on, the lights will automatically turn off
after 60 minutes. The button will have a white ring around it
when it has been turned on.
Soak:
Touching this button will turn off all pumps that may be running at the time and you will
know the feature has been activated when it has a white ring around the button. This feature
allows the user to soak in completely still water if they choose. Light functions will continue to
operate without disturbing this feature. If selected, the soak function will continue for 60 minutes
and then automatically resume normal operation. Simply pressing any of the pump buttons will
override the soak feature and resume normal operation. Note: Because no pumps run while the
soak feature is on, heating of the water will not occur.
Pressing the back button will take you back to the home screen.
31
