MAINTENANCE
MONTHLY MAINTENANCE
Filter Care
We cannot stress enough the importance of a clean filter for proper water filtration. Dirty filters
can restrict water flow, cause hazy water, and prevent your chemicals from working properly.
Dirty filters can also cause low flow from jets, poor water clarity and sensors to activate error
codes. It is important to clean filters regularly. Many water treatment products clear or clarify the
water by clumping microscopic particles and minerals together so that these larger particles can
be effectively trapped in the filter. A filter clogged with debris and calcium deposits does not trap
particles properly. Soak your filter cartridges in
Filter Cleaner
monthly.
Removing the Filter
1. Remove filter cover.
2. Twist filter counter-clockwise and lift filter out.
Reinstalling the Filter
Repeat above directions.
CAUTION:
Overtightening of the filter can cause the filter or filter housing to crack. Tighten filter
until it is just snug.
NOTE:
Filters and filter lids do not qualify for labor coverage. These parts can be purchased or
exchanged under warranty at your authorized Marquis
®
dealer.
Leakage Detection
Open the equipment door and check for signs of water leakage around the pump(s). Pump seals
wear out over time, especially with improper water chemistry. Early detection of pump seal
failure can significantly reduce repair costs. Pump seals, heater gaskets and pump gaskets must
be checked each month to ensure they are not leaking. Further damage caused by a leak from
any component is not covered under the warranty.
41
