Mars CPU04, User Manual

7

Titan CPU Channel Mul  plexer - Opera  on

LED Status Indicators

R 

– A red LED indica  ng the recording status.

S 

– A green LED indica  ng that the Titan CPU is scanning.

E 

– A red LED indica  ng an error condi  on within the Titan CPU.

P 

– A green LED indica  ng that the Titan CPU is ON.

ETHERNET

An RJ-45 port that enables the Titan CPU to operate over an Ethernet 
network, or to connect to a PC using an Ethernet crossover cable.

Panel Components

REM

An 1/8” TRS connec  on that permits remote Start/Stop recording. 

POWER

The 4-pin power connector provides the power input of the  
Titan CPU Channel Mul  plexer.

NOTE:  The 24V, 6-amp Power Adapter furnished 
with the Titan CPU is su

ffi

  cient to power the CPU and 

approximately eight Input Modules with no excitation. 

If using the CPU12 with more than eight modules 
connected, or if excitation is to be applied

, you will 

need to provide additional power either by powering 
some Input Modules separately with additional 
Titan power adapters or by providing power from 
another source. In the latter case, observe the power 
connection shown.

For all test con

fi

 gurations, Mars Labs recommends 

powering input modules separately to avoid potential 
power issues.

PGM

A mini-USB port for communica  ng with the device internal processor. 

LED Port Indicators (CPU08/CPU12)

Green (P) - When lit, indicates that a four-port group is powered and ac  ve.
Red (U) - When lit, indicates that a four-port group is providing power to the
RJ45 ports.