ITEMS INCLUDED IN THE PACKAGE
● Base part with platform and adjusting feet & 2m cord with indicator
● 5 pcs plastic wall plugs (2 pcs as spare part)
● 5 pcs M3x25 screws (2 pcs as spare part)
● 1 pc 5x75 crosshead screwdriver
● Instruction Manual
● Assembly Manual
PROCEDURES & INSTRUCTIONS FOR ASSEMBLING REMOTE INDICATOR
ON THE WALL
The indicator has a 2m cable to allow it to be placed at a convenient position away from the
scale. A multi-function bracket allows the indicator to be wall mounted or sat upon a desk.
7
6
IMPORTANT NOTICE TO USERS!
1. Choose the location to mount the indicator on the wall. The location should be free
of temperature extremes and water. It should be where it is within easy reach of the
operator.
2. Make sure the structure and mounting hardware are of sufficient strength to support
the indicator. The multi-function bracket should be securely fastened to the wall so
that it cannot loose from the mounting surface.
1. Use the multi-function bracket as a template and mark the 3 holes on the wall. Remove
the bracket and then drill the holes.
Holes
2. Insert three wall plugs into the holes until the wall plugs are flush with the wall. Place the
indicator against the wall and insert 3pcs M3x25 screws through the bracket into the
wall plugs. Then use neck lock to adjust the angle of the indicator.
Neck lock
Wall plugs
M3x25 Screws
- ▼ : Toggle between “on” or “off” in setting mode; Move cursor to right;
decrease value of age; toggle between male and female; toggle between
normal and athlete mode; select memory location
- : Store settings into memory; replay the last measurement result
- : Confirm button for selection
-
: Tare function in weighing mode
- : Enter into height measuring mode
PREPARATION BEFORE USE
1. Connect the Power or Insert the Batteries
Insert 6pcs x 1.5V AA alkaline batteries (included) into the battery compartment located
at the back of the indicator, or power up the scale through connecting the AC/DC adaptor
(included) with the power socket.
SAFETY
To avoid injury, do not step
on the edge of the platform.
Do not stop on scale unerenly
2. Correct Positionig
Use the scale on a flat and hard floor surface.
3. Setting the level
Before you use the scale for the first time or when
the scale has been moved to another place, the level
of the scale must be set.
A. Don’t step on the scale and remove all weight
from the platform.
B. Place the scale on hard and flat surface, use the
adjustable feet to adjust the spirit level until the
bubble inside the level indicator is located in the
centre of the circle.
Level indicator
Bubble
Circle