9
8
4. Initial start up of the scale (when moved or batteries replaced)
When the scale is powered up, all digits will be displayed for a few seconds (Fig.1), and
then the software version will be shown (Fig.2). Once initialised the scale will power
down again and is now ready for use.
OPERATION
The accuracy of the results depends on how you stand on the scale. Position your feet for
maximum contact with the metal electrodes on the platform. This ensures the best contact
between your feet and the metal contacts. Stay on the scale until estimation is completed
and the result is displayed.
Fig.1
Fig.2
SETTINGS
1. Identity Number Setting (I.D. No.)
Press and hold
[ ]
key for around 10 seconds, all digits (Fig.1)
and software version (Fig.2) will be shown on LCD successively. “Id no” with current
setting will be toggled on screen (Fig.3). Press [▼] or [▲] to toggle between “on” and “off”
and press [ ] to confirm. If select “off”, Id No. will be by-passed in measuring process &
memory mode.
Note
: I.D. No.”0000” will be shown in memory recall mode once you return the I.D. setting
from “off” to “on”.
Heels centered on electrodes (√)
Heels not touching the electrode (X)
Fig.3
2. Estimation Mode Setting
Users can select their desired estimation mode (Body fat with fat mass and fat free
mass estimation (Fig.4a), body water percentage (Fig.4b), muscle mass (Fig.4c) and/or
bone mass (Fig.4d)). “bFA” with current setting will be toggled five times (Fig.4a). Press
[▼] or [▲] to set “on” to activate or “off” to deactivate the function. Press [ ] to
confirm settings.
Fig.4a
Fig.4b
Fig.4c
Fig.4d
WEIGHING ONLY OPERATION
1. Press [ ] key, all digits (Fig.1) and software
version (Fig.2) will be shown on LCD successively, then
"o" will cycle along LCD. (Fig.5)
2. Then “0.0kg" will be displayed on LCD with “weight”
indication (Fig.6). If the display shows a positive or
negative weight, press [ ] to reset zero until LCD
displays 0.0kg.
3. Step on the scale and stand still while the weight is
being measured. “STA” will be shown if the weight is
stable. (Fig.7)
4. Then the scale will switch off automatically once it
remains idle for 20 seconds.
Fig.5
Fig.6
Fig.7
