12
13
Fig.17
7. The scale will display the results in sequence: Height, Weight, BMI (Fig.17). Each screen
will be displayed around 4 seconds, sequentially 3 times. The scale turns off automatically.
You can press [▲] or [▼] to toggle forward or backward to view the results.
BODY FAT AND TOTAL BODY WATER ESTIMATING OPERATION
4.2 Select Gender
The gender icon blinks (Fig.21). Press [▲] or [▼] key to
toggle between male and female. Press [ ] to confirm
gender.
4.3 Select Normal or Athlete Mode
The normal or athlete display blinks (Fig.22). Press [▲] or
[▼] key to toggle between normal or athlete. Press [ ]
to confirm settings. Athlete mode is only available to those
aged 18 or above. For those aged 17 or under, this step
is automatically by-passed. (See section: “
Why is the
Athlete Mode necessary in a Body Fat Analyser?
”).
Fig.18
Fig.19
Fig.20
Fig.21
Fig.22
4.4 Set height
A. If the scale is equipped with a height rod, your height will be input from the electronic
height rod. Stand on the floor with bare feet, then follow the steps of
HEIGHT
MEASURING OPERATION
to measure your height. However, you are still allowed
to input your height manually even if the scale is equipped with height measuring
rod. Press
[CE]
and input height by numeric keys.
B. If the scale is without height rod, you can set your height manually. Input your 4 digit
height by numeric keys.
5. Press [ ] to confirm your height.
6.
Measuring
Step on the scale and stand still while the weight is
being measured. “STA” will be shown if the weight is
stable (Fig.23).
Fig.23
1. Enter into Body Fat Estimation Mode
Press
[ ]
key, all digits (Fig.1) and software
version (Fig.2) will be shown on LCD successively, then
“bMI” will be displayed on LCD (Fig.13). Press
[ ]
key again and “bFA” will be displayed on
LCD (Fig.18). Press [ ] to confirm, then “o” will cycle
along the LCD (Fig.5).
2. Step on the scale with bare feet when the screen showing
“stEP” (Fig.14).
3.
Set ID NO. (Available when I.D. No. set “on”)
“----” will be shown on LCD (Fig.19). Enter 4 digits by
numeric keys or press
[CE]
to input ID no. again. Press
[ ] to confirm.
4.
Set Body Fat and Body Water Parameters (BFA
Parameters)
4.1 Set Age
The age display blinks (Fig.20). Press [▲] or [▼] key or
numeric keys to adjust the age. Press [ ] to confirm.
7. Continue to stand on the scale; the screen displays the measurement pattern while
computing (Fig.24).
8. The scale will display the results (height, weight, body fat percentage, fat mass, fat
free mass, body water percentage, muscle mass and bone mass) in sequence (Fig.25)
according to your preference (refer to section:
SETTINGS: Estimation Mode Setting
).
Each screen will be displayed around 4 seconds, sequentially 3 times. You can press
[▲] or [▼] to toggle forward or backward to view the results. The scale turns off
automatically.
Fig.24
C
IMPORTANT NOTICE TO USERS
● A few steps must be followed before estimating body fat and body water
PROGRAM PERSONAL PARAMETERS
Input the user’s height, age, gender and normal or athlete mode before body fat and
body water estimation. Once the information is memorised, it will only need to be
re-entered if there is a change to the data.
● Ensure data input for each personal parameter is completed within 20 seconds
otherwise the scale will switch off automatically.
●
Always estimate your body fat and body water in bare feet.