14
15
Fig.25
The scale features 25 personal memory settings. This allows
users to store and recall their own settings.
A. To Store Settings into Memory
1. Follow steps 1-4 in the section of
BMI MEASURING
OPERATION.
2. Press and hold [ ] key for 2 seconds to store up all
settings, “M” with last memorised location will blink
(Fig.26). Press [▲] / [▼] or numeric keys 0-24 to select
the memory location. Press [ ] to confirm memory
locations. Or press [
CE
] to cancel and select another
memory location again.
3. If the memory is empty, “----” will be displayed (Fig.27).
Press [ ] to confirm.
Fig.26
Fig.27
MEASURING BMI WITH USER MEMORY
4. If the memory is occupied, “uSEd” will be displayed
(Fig.28). Press [ ] to confirm. “CLEAr” will be displayed (Fig.29). Press [ ], the new
settings will be memorised and replaced the previous setting.
5. Follow steps 6-7 in the section of
BMI MEASURING OPERATION.
Fig.28
Fig.29
Fig.30
B. To Recall Setting from Memory
1. Press
[ ]
key, all digits (Fig.1) and software
version (Fig.2) will be shown on LCD successively, then
“bMI” will be displayed on LCD (Fig.13). Press
[ ]
key twice and “mem” will be displayed on LCD (Fig.30).
2. Press [ ] to confirm and it will enter into memory recall mode. “M” with last
memorised location will blink (Fig.26). Press [▲] or [▼] or numeric keys 0-24 to select
memory location. Press [ ] to confirm the memory location.
3. If the memory is empty, “----” will be displayed (Fig.27). Press [▲] or [▼] or numeric
keys 0-24 to select another memory location.
4. If the memory is occupied, memorised BMI parameters will be shown on screen (ID
No, and height will be toggled on screen). Press [ ] to confirm and “o” will cycle
on screen.
5. Follow steps 6-7 in the section of
BMI MEASURING OPERATION.
ESTIMATING BODY FAT AND TOTAL BODY WATER WITH USER MEMORY
Fig.31
Fig.32
A.
To Store Settings into Memory
1. Follow steps 1-4 in the section of
BODY FAT AND
TOTAL BODY WATER ESTIMATING OPERATION.
2. Press and hold [ ] key for 2 seconds to store up all
settings, last memorised location will blink with current
setting on screen (Fig.31). Press [▲] / [▼] or numeric
keys 0-24 to select the memory location. Press [ ] to
confirm memory locations. Or press
[CE]
to cancel and
select another memory location again.
3. If the memory is empty, “----” with current setting will be
shown on screen (Fig.32). Press [ ] to confirm.
4. If the memory is occupied, “uSEd” with current setting
will be displayed (Fig.33). Press [ ] to confirm.
“CLEAr” with current setting will be displayed (Fig.34).
Press [ ], the new settings will be memorised and
replace the previous setting.
5. Follow steps 6-8 in the section of
BODY FAT AND
TOTAL BODY WATER ESTIMATING OPERATION.
Fig.33
Fig.34
C
IMPORTANT NOTICE TO USERS
● Do not step on the scale until "0.0kg" with "STA" indication shows on screen.
