13
3. NET
The NET annunciator is illuminated to show that the weight
displayed is the net weight. Net weight is determined by
subtracting the stored tare weight from the gross or scale weight.
The tare weight, usually the weight of the container, is entered
using the tare key. Note that the NET annunciator is only active
when a zero tare weight or tare weight value is stored and the
display is in the weight mode as shown by the illumination of the
lb or kg annunciator.
4. ZERO (Center-of-Zero)
The Center-of-Zero annunciator is located on the left of the
display and is illuminated to indicate that the weight is /-
1/4 division of the center of zero.
5. Insuf Sample
The Insuf Sample annunciator is located on the lower left of the
display and is illuminated to show that the sample is too small to
calculate an accurate piece weight. If the counting function is
continued without increasing the sample size, the scale will still
operate even though accuracy will be affected.
6.
(Low Battery)
The Low Battery annunciator will illuminate to indicate that the
internal battery requires charging. No change in operation will
occur until just before the battery voltage drops to a level where
operation is affected. At this level, the scale will automatically turn
itself off.
