12 of 14
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
WS2638
REPLACEMENT PARTS
REPLACEMENT
EDI
REPLACEMENT
PART#
DESCRIPTION
INCLUDES
DETAIL #’S
29796
526B
REPLACEMENT BLADE, 526/126
22
29860
847-RP
REPLACEMENT HANDLE SPRING PIN, 5/16" 1 SIDED
14
29877
858-RP-EZFLR
REPLACEMENT HANDLE ASSEMBLY
3, 5,10, 12, 18
29880
858-RP-L200
REPLACEMENT HANDLE LOWER ONLY
3
29881
858-RP-U009
REPLACEMENT HANDLE UPPER ONLY
5,10,12
29906
868-RP-EZ
REPLACEMENT HANDLE GRIP ONLY
12
29874
856AG-26
ANGLE GUIDE KIT -26"
24, 25, 26, 27, 28,
29
29901
865-220-RP
REPLACEMENT BEARING SET, 526, 213-SST
33
29857
845-RP-R26
REPLACEMENT RAIL SET FOR 526 (4/SET)
4
29885
860-RP-CML
REPLACEMENT CAMLOCK PIN & CHAIN
6
29893
862-RP-220
REPLACEMENT PINS (2EA),
213-SID / 220 SINGLE CAM / 526
8,32
29897
863-RP-EZ50
REPLACEMENT HANDLE ATTACH BOLTS,
F BEAM EZ SHEAR
18 (partial)
29898
863-RP-EZ80
REPLACEMENT 10MM X 80MM AXLE BOLT
7
29889
861-RP0526
REPLACEMENT CAMSHAFT, 526
(BEARINGS NOT INCLUDED)
1
29909
869-RP-526
REPLACEMENT BLADE STOP 526/126
17
29853
822-RP-526
REPLACEMENT TABLE, 526
15
TROUBLESHOOTING
Before troubleshooting double-check the manual:
• Is your shear properly assembled?
• Is it being operated correctly?
• Is it properly lubricated?
• Has the blade been honed as recommended?
Visually inspect shear, watching for objects that might obstruct the blade or powerhead travel:
• Foreign material presence between the blade and anvil, in the pin springs or under the cam.
• Check your blade for chips, cracks or burrs.
• Make sure bearings are intact and lubricated. They should not be spinning/moving on the cam during use.
NOTE: This troubleshooting is for all Bullet shears. If you are uncertain if it pertains to your shear, please contact
Marshalltown customer service.
Replacement parts are available at www.marshalltown.com – search for the Replacement EDI as listed above.
