background image

4 of 12

104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127  •  Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com

WS2641

SAFETY DECALS

If your safety decals are damaged, they can be replaced by contacting Customer Service.

WARRANTY

This product is warranted to the original purchaser only, to be free of defects in material and workmanship 
under normal use, for one year from purchase date. MARSHALLTOWN

®

 shall without charge for parts and labor, 

repair or replace such parts which are found to be defective. All transportation charges for replacement parts 
must be borne by the purchaser. 

For warranty service, the product must be delivered, with proof of purchase date, to MARSHALLTOWN

®

Contact MARSHALLTOWN

®

 Customer Service to determine the best method of delivering the product that 

is under warranty.  The delivery of the product must be made no later than 30 days after the expiration of the 
warranty period. 

All implied warranties, including those of merchantability and fitness for a particular purpose, are limited to one 
year from date of purchase by the original retail customer and to the extent permitted by law any and all implied 
warranties are excluded and disclaimed after the expiration of such period.  

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitations of 
incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty 
gives you specific legal rights, and you may also have other rights, which vary from state to state.  

Exclusion from this warranty: 

  1.  All consequential damages, including pickup and delivery of the unit, communication, mileage charges and/

or rental of a replacement unit during repairs are not covered under this warranty, or are any loss of income 
and/or other loss resulting from the failure of the product to function due to a warranty defect. 

  2.  This warranty will not apply when the product becomes inoperative due to misuse, normal wear, neglect, 

improper maintenance, accident or freight damage; has not been operated and maintained in accordance 
with the instructions furnished in the Operator’s Manual; or has been altered or modified without approval 
from the factory Service Department. 

  3.  No parts or products are to be returned to the factory without prior written approval from the factory.

R6166

Summary of Contents for 29953





































Reviews: