10 of 16
104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.MARSHALLTOWN.com
WS2712
PRODUCT OPERATION
Step 6
- Lock guide fence (B) by pressing
down on latch lever (C).
a. Glider should slide freely over the vinyl plank.
If the runners are pinching against the vinyl
plank, then release the cam lever and
reclamp the guide fence in a looser position
.
Step 5
– Slide guide fence (B) up to the vinyl
plank
a. Set the vinyl plank onto the fence side runner.
b. Vinyl plank should be captured on both sides.
Step 8
- Slide blade receiver (D) to the desired
position.
Step 7
– Unlock blade receiver (D) by lifting
latch lever (E).
Step 10
- Extend blade by turning knob (A)
clockwise. Blade should cut into vinyl plank by
about
1
/
16
"
(1.5mm).
Step 9
– Lock blade receiver (D) by pressing
down the receiver latch lever (E).
WARNING
ATTEMPTING TO SCORE A VINYL PLANK WITH THE BLADE
EXTENDED TOO FAR CAN BREAK THE BLADE
!
!
