background image

                                                                                  7 

 

When there is no power and need to push with hand, you can turn the spanner into   

the following position and then it works. Please notice, when spanner is in this position, 

the car can not be started up. 

 

◆ 

Seat  

1. The seat can be turned to 45 degrees or 90 degrees. 
2. Push the sea adjustable bar forward to change angle. 
3. Seat height can be adjusted by loosening the seat height adjustment pin, adjusting 
the seat to the desired height and then re-tightening the pin.

 

 Battery Condition Meter 

1. When the power switch is turned on, the battery meter will light up with 5 LED 
lights indicating the remained power of the battery. 
All 5 LED lights: full of power.1 LED light with beeper   
Warning: out of power. 
2. The remaining power indicated by the battery meter will vary by the driving time 
and the way the vehicle is driving. Repeated starting, stopping and climbing will 
consume the power more quickly. 

4.3 How to set to freewheel mode

 

1. 

Drive on mode: push the lever down completely, the vehicle can be driven by 

motor power.

 

2. Free-wheel Mode: Lift the lever up completely or press the Starting Push button, 
the vehicle can be moved manually.

 

Summary of Contents for DL24500-2













Reviews: