AIR FEED
Use only compressed air. Check airline for damage from humidity &
contaminants. In order to protect the tool from premature wear it is
recommended a filter
separator
&
regulator
assembly be used.
A lubricator is not
necessary but a separator is highly recommended.
Normal working pressure is
85-95 PSI.
Air connection size
¼
-20
”
NPT.
WARNING: Do not use air supply greater than recommended or tool
may be damaged or burst. Do not use oxygen, combustible gases or
bottled gases as a source for this tool. Gases could cause the tool to
explode.
CAUTION:
ALWAYS WEAR SAFETY GLASSES WHEN OPERATING TOOL
Main Components
A: Mandrel
B: Nosepiece
C: Nosepiece Lock Nut
D: Rocker Trigger 1. Upset 2. Reverse
E: Mandrel Adapter Release
F: Balancer Connector
G: Stroke Adjustment Ring
H: Pneumatic Motor
I: Fluid Plug
J: Air Connection (1/4-20 NPT female)
J
