E: sales@martecltd.com.au | P: 02 8778 7500
www.martecaustralia.com.au
WARNING
Installation MUST carry out by a qualified and licensed electrician.
WiFi / Remote Control Pairing
WARNING
•
Installation of fans
MUST
follow SAA standards and meet local authority regulations.
•
Installation
MUST
be carried out by a qualified and licensed electrician.
•
Fan and light
MUST
be earthed.
•
Bracket
MUST
be firmly attached to a flat solid structure or timber frame.
•
DO NOT
mix blades from one model to another, all blades MUST be replaced if damaged.
•
The warranty is
VOID
if product is not installed according to this installation guide.
6* Year Warranty
Visit our website for details
https://www.martecaustralia.com.au/warranty-statement/
Fan only model
Fan LED Light Model
5
F/R
1
2
3
4
4H 8H
LED
LED
-
+
FAN
OFF
LIGHT
OFF
1H
5
F/R
1
2
3
4
4H 8H
FAN
OFF
SLEEP
MODE
1H
Pairing the remote control
1. Turn on the ceiling fan.
2. Within the first 20 seconds,
continue pressing the
FAN OFF
button until you hear a “beep”
sound. ie. It is paired.
If you don’t hear a “beep” sound,
repeat step 1 and step 2 again.
Pairing the WiFi control
1. Turn on the ceiling fan.
2. Within the first 20 seconds,
continue pressing the
SLEEP
MODE
button until you hear a
“beep” sound. ie. It is paired.
If you don’t hear a “beep” sound,
repeat step 1 and step 2 again.
FAN OFF: to switch off the fan.
SLEEP MODE: automatically reduce 1 gear every 1 hour until it
drops to 0 gear. 0 gear means low speed and will not stop.
SPEED BUTTON: 1 = lowest speed. 5 = highest speed.
NATURAL WIND MODE : designed for the elderly and
children. 1-5 gear changes randomly to feel the breeze.
F/R: summer/winter reverse mode.
TIMER 1H/4H/8H: preset timer for fan and light to stop
automatically. ie. if timer set at 1H and then press 4H, fan will
stop at 4H. Setting default to last press.
Pairing the remote control
1. Turn on the ceiling fan.
2. Within the first 20 seconds,
continue pressing the
FAN OFF
button until you hear a “beep”
sound. ie. It is paired.
If you don’t hear a “beep” sound,
repeat step 1 and step 2 again.
Pairing the WiFi control
1. Turn on the ceiling fan.
2. Within the first 20 seconds,
continue pressing the
LIGHT
OFF
button until you hear a
“beep” sound. ie. It is paired.
If you don’t hear a “beep” sound,
repeat step 1 and step 2 again.
FAN OFF: to switch off the fan.
SLEEP MODE: automatically reduce 1 gear every 1 hour until it
drops to 0 gear. 0 gear means low speed and will not stop.
SPEED BUTTON: 1 = lowest speed. 5 = highest speed.
NATURAL WIND MODE : designed for the elderly and
children. 1-5 gear changes randomly to feel the breeze.
F/R: summer/winter reverse mode.
TIMER 1H/4H/8H: preset timer for fan and light to stop
automatically. ie. if timer set at 1H and then press 4H, fan will
stop at 4H. Setting default to last press.
: warm white (3000K) / netural white (4000K) /
cool white (5000K)
LED- LED+ : minus “-” = reduces brightness
plus “+”= increases brightness
