AS Martem Data Concentrator TELEM-GW6e User Manual
Rev. 11 / 2013
Akadeemia tee 21/6 Tel: +372 639 7979 E-mail: martem@martem.eu
12618 Tallinn Fax: +372 639 7980 www.martem.eu
Estonia
- 14 -
•
Polling(v)/Answering(^) Delay [ms]
– Delay between reception and the
next query
•
Port Link Address/Transp.con.Group
– Link address of the device on
uplink channels
•
Length of Link Address
- Length of the link address in bytes on uplink
channels. Possible values are 1 or 2
•
IEC Port ASDU Address
– ASDU address on uplink channels
•
Length of ASDU Address
– Length of the ASDU address in bytes on
uplink channels. Typically 2, possible values are 1 or 2
•
IEC Object Length
– Length of the IEC object address in bytes on uplink
channels. Typically 2, possible values are 1, 2 and 3
•
Up Protocol SubVersion
– Number of protocol subversion on uplink
channels
•
Query Timeout [ms]
– Query timeout for devices on downlink channels
•
Failed Query Count for disabling contr.
– Count of timeouts after which
the error flag is raised and the query of this device temporarily suspended
•
Retry Query/Test Interval [s]
– Time period after which the suspended
device is queried again
•
Suppress Echo
– If the sent messages are echoed back by the
connected devices then they need to be suppressed
•
Replace Event hrs
– Yes/No. If Yes, events are sent to control centre with
UCT time (the time correction value is set in Common Menu, Timing
Settings)
•
Time
– Determines the time tag of events
•
Allow Timesync
– Yes or No
•
Control takeover DO obj.addr.
– The address of an object that
determines control takeover of that device
•
Control takeover DI obj.addr.
– The address of an object that shows
which channel has taken over the control rights
•
Time Zone
– Determines time zone, localtime or Tallinn, Estonia, or UTC
•
Comment
– useful field for comments of port property
