6
Unpacking
Carton Contents
• Grass t edger
• Safety guard
• Auxiliary handle
• Handle knob and bolt
• Edger guide + flower guard
• SharperBlade
™
(Model# SB601RB)
• Manual with registration card
1. Carefully remove the electric grass t edger and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric grass
t edger. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations or save the packaging
for long-term product storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Secrets to a Long Lasting
SharperBlade
™
CONGRATULATIONS! You are about to experience a faster,
easier, way of grooming your lawns edge and managing
weeds.
First, you will notice that there are obvious differences between
your SharperBlade
™
and string line, among which are size and
shape. These differences require you to operate your t
edger slightly different:
1. Use MINIMAL pressure when edging against concrete,
brick, or stone. Since the SharperBlade
™
is more ridged
than string, you may feel the need to put pressure on the
blade while edging. The more pressure you apply, the
FASTER the blade will wear. In contrast, the less pressure
you apply against hard surfaces, the LONGER the blade
will last! The SECRET is to keep the blade just off the hard
surface.
2. NEVER FORCE your SharperBlade
™
. High speed, along
with an impact against any hard surface, may cause
the blade to buckle near the center hub, and tear. The
SECRET is to allow the SharperBlade
™
to do ALL the work
without extra effort.
Assembly
Before using the SharperBlade
™
electric grass t edger,
follow these instructions to assemble:
Fitting Auxiliary Handle
1. Remove the t edger and parts from the box.
2. Adjust the handle to the most comfortable position.
3. Assemble the auxiliary handle by inserting the handle bolt
into the auxiliary handle, and installing and tightening the
handle knob provided (Fig. 1).
Edger Guide + Flower Guard
1. Insert the steel edger guide + flower guard into the lower
motor cover and lock in place (Fig. 2).
Pressure =
LONG
LASTING
Auxiliary handle
Handle knob
Bolt
Fig. 1
Edger guide +
Flower guard
Fig. 2
