INTRODUCTION
The SE350 voltage regulator is an encapsulated electronic voltage regulator that controls the
output of a brushless AC generator by regulating the current into the exciter field.
SPECIFICATION
SE350 REGULATOR
Sensing & Power Input
190-240 Vac
Burden
500 VA
Output Power- Continuous
73 Vdc at 3.5 Adc (255w)
Output Power - Forcing(240 Vac Input Power)
105 Vdc at 5 Adc (525w)
Regulation
1 .0%
Remote Voltage Adjustment Range
± 10% with 2000 ohm rheostat
± 5% with l000 ohm rheostat
Frequency Compensation
Adjustable
Roll off frequency
54-61 Hz for 60 Hz
45-51 Hz for 50 Hz
Operation
Weight6.5 oz.
Operating Temperature
- 40°C to + 60°C
Storage Temperature
- 65°C to + 85°C
Power Dissipation
8 watts maximum
Size
3.94" L X 2.66” W X 2.20: H
Voltage Buildup
Internal provisions forautomatic voltage
build up from generator residual voltage as
low as 10 Vac.
EMI Suppression
Internal Electromagnetic Interference
Filter (EMI Filter )
WARNING
TO PREVENT PERSONAL INJURY OR EQUIPMENTDAMAGE
ONLY QUALIFIED PERSONNEL SHOULD
INSTALL, OPERATE, OR SERVICE THIS DEVICE.
CAUTION: DO NOT megger or high-pot the generator with the regulator connected.
DO NOT high-pot the regulator.
