All material © 2009. Martin Audio Ltd. Subject to change without notice.
14) Editing Audio Parameters – Input Channels
Input Gain
The range of the control over the input gain is –40dB to +6dB in 0.1dB steps.
Gain
The display will show, for instance
InA Input A Gain
Input Gain = +6.0dB
Base Delay
The maximum available delay between any input and output is 650.00mS. For example, if
the input delay on channel A is set to 500mS, the maximum available output delay for any
output fed from input A will be 150mS.
x 1mS x 0.01mS
The display will show, for instance
InA Input A Delay
Base Delay = 0.00mS
Input Parametric EQ
There are eight bands of parameter equalisation available on every input. The behaviour of
each individual band can be changed to a variety of different filter shapes, including high and
low shelves, notch, and band-pass. Changing the filter type is achieved by pressing
ENTER
during editing any particular band.
Frequency Q Gain
The display will show, for instance
InA Input A PEQ:1<>
1k00Hz Q=3.0 0.0dB
Summary of Contents for DX1.5
Page 1: ......