All material © 2009. Martin Audio Ltd. Subject to change without notice.
Pressing
ENTER
will first show something like
AES Device Status
V1: E V2: E
This display shows the correct operation of the AES transmitters V1 & V2. The letter after
each is the silicon version (and is of no importance to the user).
Pressing
ENTER
again will show
AES Device Status
V : 96k0
This display shows the status of the AES receiver. The sample rate the unit has been able to
lock to is shown, or
UNLOCKED
will be displayed in its place. The unit will lock to sample
rates from 32kHz up to and including 192kHz.
The unit’s own processing sample rate is 96kHz, and AES output data is always at 96kHz.
Internal sample rate converters will translate all incoming rates to 96kHz – one converter for
each AES input. This allows the two input streams to be at different rates if necessary.
20) Warranty
Martin Audio DX1.5 Loudspeaker Management Systems are warranted against manufacturing
defects in materials or craftsmanship over a period of 1 year from the date of original
purchase.
During the warranty period Martin Audio will, at its discretion, either repair or replace products
which prove to be defective provided that the product is returned in its original packaging,
shipping prepaid, to an authorised Martin Audio service agent or distributor.
Martin Audio Ltd. cannot be held responsible for defects caused by unauthorised
modifications, improper use, negligence, exposure to inclement weather conditions, act of
God or accident, or any use of this product that is not in accordance with the instructions
provided by Martin Audio. Martin Audio is not liable for consequential damages.
This warranty is exclusive and no other warranty is expressed or implied. This warranty does
not affect your statutory rights.
Summary of Contents for DX1.5
Page 1: ......
